Skip to content
TimeQeeper

Multi-year maintenance plan: what it is and how to create one

Maintenance & planning10 min readUpdated 15 November 2026By TimeQeeper

A multi-year maintenance plan sets out, for each component of a building, site or installation, which major maintenance and replacements are due over the coming years, in which year and at what cost. It usually looks ten years ahead or more. In the Netherlands it is called a meerjarenonderhoudsplan, or MJOP. For example: the roof covering of an industrial hall needs replacing in 2028 at €98,000, and the air compressor is due an overhaul in 2028 and 2034 at €11,000 each time. Add up all the measures per year and you can see which years will be expensive and how much to set aside every year.

What goes into a multi-year maintenance plan?

At its core, a multi-year maintenance plan is an overview with the components in the rows and the years in the columns. The cells hold the measures and their costs, and the bottom line shows the total per year. A complete plan contains:

  • The components, with quantity and year of construction or installation: 2,400 m² of roof covering, four overhead doors, one compressor.
  • The condition of each component, measured with a fixed method such as NEN 2767, and the date of the survey.
  • The measures: maintenance such as painting, repair, overhaul or replacement, with the cycle and the year in which they fall.
  • The costs per measure and per year, with the assumptions: the price level, whether VAT is included, and whether there is an allowance for inflation.
  • The reserve: how much you set aside each year and how the balance develops.

What it usually leaves out is the small work: breakdowns, minor repairs and the inspections and lubrication that keep coming round. Those belong in the maintenance plan and in each week's work orders.

You choose the horizon yourself, but for a Dutch owners' association that bases its reserve contribution on the plan, ten years is the legal minimum. A longer horizon, such as twenty or thirty years, also brings long-cycle replacements into view, such as a lift, the entire site paving or the control system of an installation.

Who needs a multi-year maintenance plan?

In the Netherlands, the MJOP is most familiar to owners' associations of apartment buildings and to property owners such as housing associations and municipalities, who use it to budget for major work. The same question applies to anyone with expensive components that wear over the years: which major costs are coming, and when?

Think of a waste company with a transfer hall and weighbridges, a factory with compressors and refrigeration plant, or a logistics firm with a yard and loading docks. There the plan may be called a long-term maintenance plan, a capital plan or a replacement plan, but it works the same way. The main difference from buildings lies in the data. For installations, the moment to act often depends more on running hours, failures and the availability of spare parts than on what you can see.

How does it differ from a maintenance plan and a maintenance concept?

The three terms often get mixed up, but each answers a different question:

InstrumentAnswersTimescaleOutcome
Maintenance conceptWhich maintenance type suits which failure mode?As long as the asset and its use stay the sameA choice per failure mode, with the reason
Maintenance planWhich tasks, how often and how?Intervals from days to yearsRecurring tasks, grouped into rounds
Multi-year maintenance planWhich major interventions in which year, and what do they cost?Ten years or moreMeasures and costs per year, the basis for the reserve

The maintenance concept decides which type of maintenance suits each asset. The maintenance plan turns that into tasks that keep coming back. The multi-year plan covers the major costs that occur rarely or only once: the overhaul after 24,000 running hours, the new roof covering, the replacement of an entire installation. If the concept lets an asset run until the end of its life, the multi-year plan says in which year the replacement falls and what it will cost.

Condition assessment to NEN 2767

A multi-year plan is only as good as the condition data behind it. In the Netherlands there is a standard for this: NEN 2767, a method for recording the state of building and installation components objectively and repeatably. Part 1 describes the method, and part 2 contains the defect lists for buildings and was revised at the end of 2025. Besides the building fabric, including the site, the standard also covers electrical engineering, heating and ventilation, and transport systems such as lifts.

The surveyor rates every defect they observe on three characteristics:

  • Severity: minor, serious or severe. For many defects the severity is fixed in the defect lists; a leak weighs more heavily than discolouration.
  • Intensity: how far the defect has progressed, from the initial stage through the advanced stage to the final stage.
  • Extent: how much of the component is affected, in five classes from incidental (under 2 per cent) to general (70 per cent or more).

Together these give each component a condition score from 1 to 6. The scores of the components can be combined into a score per element and per building.

ScoreConditionWhat you see
1ExcellentIncidental minor defects
2GoodIncidental early signs of ageing
3FairLocally visible ageing, the function is not at risk
4ModerateThe function is occasionally at risk
5PoorThe ageing is irreversible
6Very poorTechnically ready for demolition

The score tells you what state a component is in, not what to do about it or when. You make that choice yourself, in the multi-year plan, for example by setting a minimum condition for each component.

For technical installations, a visual survey is often not enough. A compressor can look perfectly tidy and still be due an overhaul. So combine the condition score with running hours, failure history, measurements and whether the manufacturer still supplies parts. Note how this differs from condition-based maintenance: there you measure regularly to catch one failure mode in time, whereas a NEN 2767 survey every few years gives an overall picture for the long term.

How to create a multi-year maintenance plan in seven steps

  1. List the components. Break the property down into the components you maintain separately, with quantity, year of construction or installation and, for installations, type and running hours. If you have an asset register, start there: its assets and positions are the rows of your plan.
  2. Assess the condition. Have a survey carried out to NEN 2767, or at least always use the same method, so that you can compare the scores. Record photos and findings for each component.
  3. Decide on the measure and the cost for each component. Does it need maintenance, repair, overhaul or replacement? Multiply quantity by unit price and add the extra costs, such as scaffolding, preparation, supervision and a contingency. Whether overhauling or replacing works out cheaper is a life cycle cost question, as explained in repair or replace.
  4. Spread the measures over the years. The year follows from the condition, the cycle and, for installations, the usage: an overhaul every 24,000 running hours comes round every six years at 4,000 hours a year. Combine work that needs the same preparation, such as scaffolding or a plant shutdown.
  5. Prioritise and flatten the peaks. Not everything fits into the same year. Whatever affects safety, legal requirements or operations comes first; an asset criticality analysis shows which components those are. Measures with some slack move to a quieter year.
  6. Set the reserve. Spread the total cost evenly over the years and check that the balance stays positive at the end of every year. If an expensive measure falls early in the period, you need an opening balance or a higher contribution in the first years.
  7. Update the plan every year. Record what was done and what it actually cost, new findings and changed prices. Push back measures that are not yet needed, and have the condition surveyed again every few years. The maintenance history per asset shows what has already been done; you can see how it is kept with the asset alongside its life phase under asset management software.

Example: a multi-year plan for an industrial building with installations

A recycling company has a site with a 2,400 m² hall, an office, a paved yard, a weighbridge and a compressed air system. At the end of 2026, the maintenance department draws up a multi-year plan for 2027 to 2036, based on a condition survey and the data in the maintenance system. All amounts are examples, excluding VAT, at 2026 prices and without an allowance for inflation.

The example from this article: the measures per component over ten years, in thousands of euros, with the total per component on the right and the total per year below. Replacing the roof makes 2028 the most expensive year (€109,000), so the paintwork moves back a year. Altogether the plan costs €302,000, an average of €30,200 a year.Multi-year plan 2027–2036 for an industrial building (example)Amounts in € thousands, excluding VAT, at 2026 prices, no inflation2027202820292030203120322033203420352036TotalHall roof covering2,400 m², replace9898Office paintworkfacade and frames, every 6 years→141428Hall overhead doors (4)overhaul, then replace64450Air compressoroverhaul per 24,000 running hours111122Weighbridgereplace load cells1818Fire alarm systemreplace control panel2626Site pavingpatch repairs, every 5 years161632Office air handling unitreplace2828Total per year221091418261644111428302average 30.2 a yearpeakreplaceoverhaul or repairpaintingmoved back a year
The example from this article: the measures per component over ten years, in thousands of euros, with the total per component on the right and the total per year below. Replacing the roof makes 2028 the most expensive year (€109,000), so the paintwork moves back a year. Altogether the plan costs €302,000, an average of €30,200 a year.
YearMeasuresTotal
2027Hall overhead doors: overhaul (€6,000); site paving: patch repairs (€16,000)€22,000
2028Hall roof covering: replace (€98,000); air compressor: overhaul (€11,000)€109,000
2029Office paintwork: facade and frames (€14,000)€14,000
2030Weighbridge: replace load cells (€18,000)€18,000
2031Fire alarm system: replace control panel (€26,000)€26,000
2032Site paving: patch repairs (€16,000)€16,000
2033Hall overhead doors: replace (€44,000)€44,000
2034Air compressor: overhaul (€11,000)€11,000
2035Office paintwork: facade and frames (€14,000)€14,000
2036Office air handling unit: replace (€28,000)€28,000
2027–203612 measures€302,000

This is how the years were set:

  • Roof covering: condition score 4 at the survey, with leaks along the seams. Replaced in 2028; until then, local repairs from the regular maintenance budget.
  • Air compressor: an overhaul every 24,000 running hours. At the end of 2026 the counter stands at 16,000 hours since the last overhaul and the compressor runs about 4,000 hours a year, so the overhaul falls at the end of 2028 and the next one at the end of 2034. In the maintenance plan the same overhaul runs as a round on running hours; see preventive rounds for how such a round works.
  • Paintwork: every six years, last done in 2022, so due in 2028 by the cycle. With a condition score of 2 it can wait a year. It moves to 2029 to take pressure off the roof year, and the cycle moves with it to 2035.
  • Overhead doors: an overhaul in 2027 keeps the four doors in service until 2033, when they are replaced.
  • Fire alarm system: the manufacturer stops supplying parts for the control panel after 2030, so the panel is replaced in 2031.
  • Site paving: patch repairs every five years. Full replacement falls around 2040, outside these ten years; a longer horizon would show that cost.
  • Weighbridge and air handling unit: replaced at the end of their expected life, in 2030 and 2036.

Over ten years the plan costs €302,000, an average of €30,200 a year. That average is a sound basis for the reserve, but the money also has to be there in time. If the company sets aside €30,200 a year from 2027 with no opening balance, by the end of 2028 it has €60,400 against €131,000 of spending: a shortfall of €70,600. With an opening balance of at least that amount, the balance never drops below zero. Otherwise the roof replacement needs separate financing.

What Dutch law requires of an owners' association (VvE)

In the Netherlands, an owners' association (vereniging van eigenaars, VvE) manages the shared parts of an apartment building. For a VvE, the MJOP is more than a planning aid. Article 5:126 of the Dutch Civil Code requires every VvE to keep a reserve fund for costs that do not recur every year. Since 1 January 2018 there has also been a minimum annual contribution for buildings that are wholly or partly residential. Each year the VvE sets aside at least:

  • the amount the general meeting of owners sets on the basis of a maintenance plan. The plan covers the common parts and must have been adopted by the meeting itself; it may be no more than five years old and must span at least ten years. It includes the necessary maintenance and repairs and the planned renewals, with a calculation of their cost and an even allocation of that cost over the years; or
  • 0.5 per cent of the reinstatement value of the building, the amount needed to rebuild it. For a reinstatement value of €8 million, that is at least €40,000 a year.

In principle, the money is held in a separate current or savings account in the VvE's name.

So a VvE is not obliged to have an MJOP in every case. But without one, nobody knows whether 0.5 per cent is enough; with an old roof and ageing installations it may be too little.

The rules may change. In 2026 the Dutch government put a bill to speed up sustainability improvements and maintenance in VvEs out to public consultation (in Dutch), which closed on 20 September. It would extend the term of the MJOP from ten to thirty years and make a sustainability section mandatory. It is not law yet. The rules in force are in the text of article 5:126 of the Dutch Civil Code (in Dutch); if in doubt, ask a VvE manager or a lawyer for advice.

Frequently asked questions

Is a multi-year maintenance plan mandatory?

For a Dutch VvE, not literally. The law lets the association choose between a contribution based on an MJOP and at least 0.5 per cent of the reinstatement value a year, although the reserve fund itself is compulsory. For industrial buildings, sites and technical installations there is no general legal requirement. There, a multi-year plan is mainly a way to see major costs coming in time and to justify them, for example to management, a lender or the auditor.

How often should you update a multi-year maintenance plan?

Update the plan at least once a year, ideally before next year's budget. A new condition survey every few years is usually enough, and sooner after damage or a major alteration. A VvE that bases its reserve contribution on the MJOP needs a plan that is no more than five years old.

Which condition score is acceptable?

You decide that yourself, for each component. NEN 2767 measures condition but does not say which score is good enough. You could, for example, set 3 (fair) as the minimum for the facade of a storage hall, and 2 (good) for the roof above a switchroom, where a leak can mean immediate downtime. At score 4 the function is occasionally at risk: a clear signal to plan a measure.

What is a DMJOP?

A DMJOP is a sustainable multi-year maintenance plan: an MJOP that also includes measures to make the building more sustainable, timed to coincide with maintenance you are doing anyway. If you replace the roof covering in 2028, for example, you can improve the insulation at the same time, because the roof is open anyway. The 2026 bill would make a sustainability section in the MJOP mandatory for VvEs.

Ready for more control over your maintenance?

Book a tailored demo. We'll show how TimeQeeper fits your machines, way of working and team, and we'll get in touch quickly.

We use functional storage and cookieless statistics. With your consent, LinkedIn measures visits and demo requests and helps us show relevant ads. LinkedIn may link this data to your profile.

Functional storage and cookieless statistics
Always available
LinkedIn marketing
Disabled

Your choice lasts 180 days. Declining does not affect the website or your demo request. You can change your choice here at any time.

Privacy statementCookie statement